256003PK LANsmart Pro Multi Network Cable Tester Kit with SMARTprobe Digital Probe
256003PK LANsmart Pro Multi Network Cable Tester Kit with SMARTprobe Digital Probe
LANsmart Pro is a hand-held, multifunction Cable Map Tester and Cable Length Meter that
is suitable for professional technicians or installers.
Features:
- Has an integrated Analog and Digital Tone Generator, Port Finder, and Quick Test
- Displays cable map results in a pin-to-pin format including split pairs
- All-in-one tester; wire map, twisted mapping, short location, quick test, cable length
test, self-calibrating ability, analog and digital tone generator and port finder
- Incorporates TDR (Time Domain Reflect) technology
- Wire map for open, short, reversed, cross, split, miswire, and shield continuity
- Indicates the remote number of the remote identification unit for wire map test
- Incorporate Short Location function: locate short position, it determines if short is in
the near or far end of the cable
- Measures twisted pairs of Cat5, Cat5E, and Cat6 length without remote
- Measures length of flat 2-pin, 4-pin and 6-pin telephone line
- Measures coax line length
- Self-calibrating ability for non-standard cables length display
- Incorporate Quick Test function: Memorize a cable's pin out as standard, and test mass
cables
- Incorporates Port Finder function: locate corresponding socket on hub/switch
- Its Analog Tone Generator sends 1K Hz tone on all pins or selected single pin conductors
- Its Digital Tone Generator sends Single Tone and Double Tone
- LCD and "beep" indicator
- RJ45/ RJ11/ COAX port protection from telephone line damage
- Replaceable battery, with low battery indicator
Specifications:
- Display: 128*64 dot matrix LCD
- Connector type: RJ45/ RJ11/ COAX (main and remote)
- Accuracy:
- ± 2m < than 10m (± 6.56 Feet in < than 32.81 feet)
- ± 5% > 10m (32.81 feet)
- Test range for cable length: 0 - 300m (0 - 984 ft.)
- Split pairs detection: minimum 1.2m (3.94 ft.)
- Operating Temp: 0~50 degrees C
- Storage Temp: -30~50 degrees C
- Humidity: 10 to 90%
- Dimensions:
- Master- 80 x 33 x 120mm
- Remote- 44 x 28.5 x 42mm
- Power source: DC 6V; 4*AAA