T: 0.011
35 FT RapidRun Plenum-Rated Digital Runner Cable | C2G 41182

35 FT RapidRun Plenum-Rated Digital Runner Cable | C2G 41182

Plenum Runners offer true digital performance and the highest standards in fire resistance.

Item # 29-400-035
Sale Price $276.14
1 - 2 3 - 4 5 - 6 7 - 9 10+
$276.14 $262.99 $249.84 $236.69 $223.54

Use this digital runner for in-wall installations in applications connecting an HDTV to different source devices, or for connecting a PC to a monitor or projector. Whether hanging a flat panel TV in a home or installing a commercial digital signage system, you can count on a crisp, clean signal up to 1080p. When running a digital signal at this length with RapidRun, a passive flying lead or wall plate will be required on each end.


  • Color Code: Red
  • Each connector includes a protective pulling cap that can withstand 30 pounds of pulling tension
  • Uses four 24 AWG shielded twisted pairs with drain wire, one 24 AWG twisted pair, and five 24 AWG conductors
  • Aluminum foil shield and tinned copper braid overall
  • Supports HDMI® and DVI-D high resolution video up to 1080p
  • Plenum rated for in-wall installations
  • Color: Black
  • Length: 35ft
  • Jacket Rating: Plenum
REVIEW SUMMARY for 35 FT RapidRun Plenum-Rated Digital Runner Cable | C2G 41182
No reviews for this product
  • Currently there are no related products.

Q: What kind of connector is that?

This is a proprietary circular DIN-style connector. This connector is used solely for RapidRun products.

Q: Can I join two Runners together for an extreme long length?

Couplers are available, however extreme lengths should be avoided.  Short extension cables are also available.  Please note that video source equipment and cable length will play a part in the quality of the video image on the display. Be aware of the limitations of your equipment and the effect of the additional cable on the picture quality of your display.

Q: How is the connector terminated?

The conductors of the cable are soldered securely to the DIN connector.  This is standard practice for factory-assembled cables, and results in a high-performance, highly stable connection.

Q: Is this CL2 or CL3 rated?

The Runners use a CL2-rated jacket, which is suitable for installation into walls and ceilings of residential applications.  An installer should always check with local building codes regarding cable jackets & installation practices.

Q: How large of a conduit can I put it in?

3/4” conduit, with a 90-degree sweep.  Conduit can be field-bent, or come as a factory sweep.

Q: How long of a cable can I have?

Normal signal length recommendations apply.  For standard definition analog A/V (composite, S-video, YPbPr) signals, lengths often exceed 200 feet.  The longest runners that will be stocked are 150-footers.  See the cable length “rules of thumb” in Appendix A

Q: Does it support Hi-Def?

Yes.  The analog system supports VGA & YPbPr analog video, both of which support HD resolutions (up to and including 1080p).  Length considerations should always be taken into account.  The digital system supports all HD resolutions carried by HDMI, including 1080p.

Q: How thick does the wall need to be to hold the wall plate? Do I need a special J-Box?

The Break-Away wall plate takes up the same space as a standard electrical outlet/junction box.  It fits into either plastic or metal single-gang box, or into a mud ring/Arlington bracket.  A metal box is preferred.

Q: What kind of faceplate do the wall plates use?

Any standard decora style faceplate.

Q: I want a wall plate on one end, and a pigtail on the other end—will this work?

Yes, that will work fine.  The type of termination can vary—wall plate/wall plate, flying lead/flying lead, flying lead/wall plate.

Q: Can I run the RapidRun alongside AC power?

That is not a good idea no matter what kind of AV cabling is being installed.  Best practices indicate that at least low-voltage communication cables should be separated from AC power lines by at least 6 inches of space.  If they must intersect, do so at a right angle.

Q: How strong is the pulling eye?

Pulling force should not exceed 30 pounds.  The pulling ring is designed to fail at this force, in order to protect the connector terminations.  If stronger pulling force is needed, a pulling aid that attaches to the wire itself (such as a Kellum grip) should be used.

  • "Quick turnaround time, exactly the product I needed, and a good selection of delivery options. What more to you look for from an online delivery?"

    - Jim Mills

Credit Cards