T: 0.029
4-Panel Fiber Wall-Mount Enclosure

4-Panel Fiber Wall-Mount Enclosure

24-splice, dual door

Item # ICFOD204BK
Sale Price $175.03
1 - 2 3 - 5 6 - 7 8 - 9 10+
$175.03 $171.31 $167.92 $163.83 $159.03

This ICC wall-mounted enclosure has 2 lockable doors and accepts 4 adapter panels or 2 small (12-splice) splice trays.


  • Accepts 4 adapter panels or 2 small splice trays
  • Built-in spool for easy cable management
  • Pad lock not included
  • Constructed of high-quality aluminum
REVIEW SUMMARY for 4-Panel Fiber Wall-Mount Enclosure
No reviews for this product

What is an adapter panel?

An adapter panel is a brand-standardized metal sleeve that is used to hold adapters.

Can I use any fiber patch cable in my network with my enclosure?

If your fiber enclosure is loaded, you must have cables that are compatible with the included adapters.  For unloaded enclosures, you must select adapter panels which correspond to your fiber connector type or use a splice tray for single- and mass-fusing.

What is the difference between simplex and duplex?

A simplex cable contains a single fiber within a jacket. It can be terminated with one connector at each end.  A duplex cable combines two simplex cables in seperate jacketing with two connectors at each end. It is often referred to as a zipcord.  A simplex adapter and patch cable can only send data in one direction at a time; a duplex adapter and patch cable allows data to be sent and received simultaneously.  Simplex adapters are not compatible with duplex patch cables.

What is the difference between a port, an adapter, and a splice?

The number of ports refers to the number of openings in the panel. A compatible adapter will fit into one port. If the adapter is duplex, two connections can be made through one port.  Most adapters are preloaded with a specific style of adapter. A splice is the mechanical bonding of two seperate data lines. With splice trays, more data lines can be connected in an enclosure, but splicing does not offer the ability to hot swap data lines that adapters allow.

Should I select a metal or ceramic ferrule?

The type of internal sleeve required is determined by the type of connector cladding that your cables have. Select adapter panels with the same type of insulation as your cables.

What are the differences between the fiber connectors?

ST- Uses a push and turn to lock system

SC- Has a molded plug casing with push and pull locking system

LC- Small form factor that resembles an SC connector

MTRJ- Small form factor with a square plastic casing



  • 4-Panel Wall Mount Enclosure, 1 pc
  • Slack Management Spool, 2 pcs
  • #10-32 Locknut, 4 pcs
  • #10-32 x 3/8" Pem Stud, 4 pcs
  • Velcro Tie Loop, 2 pcs
  • 8" Cable Tie, 4 pcs
  • Key, 2 pcs
  • Grounding Lug, 1 pc
  • 1/4-20 Locknut, 1 pc
  • 1/4-20 x 1/2" Pem Stud, 1 pc
  • Circuit Identification Label, 1 pc
  • Danger Label, 1 pc
  • Installation Instructions, 1 sheet

  • "Quick turnaround time, exactly the product I needed, and a good selection of delivery options. What more to you look for from an online delivery?"

    - Jim Mills
Recently Viewed Products

Credit Cards