T: 0.011
RG6 BNC Coax Cable - Male/Male - 50 FT
RG6 BNC Coax Cable - Male/Male - 50 FT Thumbnail 1 RG6 BNC Coax Cable - Male/Male - 50 FT Thumbnail 2 RG6 BNC Coax Cable - Male/Male - 50 FT Thumbnail 3 RG6 BNC Coax Cable - Male/Male - 50 FT Thumbnail 4

RG6 BNC Coax Cable - Male/Male - 50 FT

75 Ohm | Dual Shields | 18 AWG Conductor | CCS | Best For Long Runs | For Video & Amature Radio

Item # 25-260-050
Rating
Sale Price $14.99
1 - 9 10 - 24 25 - 99 100 - 249 250+
$14.99 $14.28 $13.57 $12.85 $12.14
Quantity  


Product Features

Similar to the RG59 BNC patch cable, this cable is most commonly used for video and radio applications. The bayonet locking shell design of the BNC connector makes it ideally suited for security cameras and CCTV. This cable is manufactured using UL-listed RG6 coaxial cable and features nickel-plated BNC connectors.

RG6 has a thicker diameter than RG59 (0.332 inches vs. 0.242 inches). This increased thickness means RG6 is more expensive to produce and it is also recommended for longer runs. For all lengths of BNC patch cables, however, there should be no difference in terms of performance.

Features:

  • 75 Ohm RG6/U
  • Dual shielded cable; copper braid (60%) over foil
  • 18 AWG copper covered steel center center conductor
REVIEW SUMMARY for RG6 BNC Coax Cable - Male/Male - 50 FT
No reviews for this product
1

Q: What does BNC stand for?

A: BNC stands for Bayonet Neill-Concelman. They are named after the bayonet locking mechanism and their inventors.

Q: What are BNC connectors commonly used for?

A: BNC connections are typically used on RF, video and Ethernet applications.

Q: What does “RG” mean?

A: The "RG" is short for "Radio Guide," a term that dates back to the World War II era, when the military made heavy use of coaxial cable, and developed a set of standards to specify different grades of coax and their applications. Even though we still refer to coaxial cables by their original RG numbers today, these standards are now obsolete in regard to actual military use.

Q: What is the difference between RG59 and RG6?

A: Each of these coaxial cables has a characteristic impedance of 75 ohms. RG59 cable has a smaller diameter center conductor than RG6, resulting in higher signal loss. RG59 cables are typically specified for use as equipment patch cords because of their smaller bend radius and enhanced flexibility. Since RG6 cables exhibit less attenuation than RG59, they are more commonly used for distributed cabling and are recommended for use up to 295 ft.

Q: What is the difference between 50 and 75 Ohm Cables?

A: 50 and 75 Ohm values refer to the impedance of the coaxial cable. Impedance is a measure of resistance, in the cable, to the flow of electrical energy. There really is no “good” or “bad” impedance, just the right impedance for your application. For 75 Ohm cable, the primary application is the transmission of a video signal. In the case of 50 Ohm cable, it is a data signal that is for the most part being transmitted.

Q: What does AWG stand for?

A: AWG is the gauge size and denotes the thickness of the cable. The lower the gauge of the cable, the thicker the cable will be. AWG stands for "American Wire Gauge" and is a standardized wire gauge system used throughout the industry.


SHOP WITH CONFIDENCE
CUSTOMER TESTIMONIALS
  • "Quick turnaround time, exactly the product I needed, and a good selection of delivery options. What more to you look for from an online delivery?"

    - Jim Mills
Recently Viewed Products

Credit Cards