T: 0.041
RapidRun Digital HDMI Active Wall Plate - White | C2G 42422
RapidRun Digital HDMI Active Wall Plate - White | C2G 42422 Thumbnail 1 RapidRun Digital HDMI Active Wall Plate - White | C2G 42422 Thumbnail 2 RapidRun Digital HDMI Active Wall Plate - White | C2G 42422 Thumbnail 3 RapidRun Digital HDMI Active Wall Plate - White | C2G 42422 Thumbnail 4

RapidRun Digital HDMI Active Wall Plate - White | C2G 42422

1080p resolution. Use on the display end of the digital runner to create an HDMI system 50 feet or longer.

Item # 15-000-027
Sale Price $114.99

A cost-effective, efficient and reliable modular digital video interface for installations featuring digital signage, digital theater and cutting-edge presentation technologies!


  • Color Code: Red
  • For use with RapidRun Digital Video Runners (color code red)
  • Supports HDMI uncompressed high resolution video
  • Fits a standard J-box
  • Compatible with Decora brand cover plates
  • Active Break-Away wall plate for use with runners over 25 feet, always installed at the source end of the runner
  • Recommend to use with Impact Acoustics SonicWave series HDMI and DVI cables 2 meters or shorter
  • Maximum video resolution: 1080p
REVIEW SUMMARY for RapidRun Digital HDMI Active Wall Plate - White | C2G 42422
No reviews for this product

Q: What kind of connector is that?

This is a proprietary circular DIN-style connector. This connector is used solely for RapidRun products.

Q: Can I join two Runners together for an extreme long length?

Couplers are available, however extreme lengths should be avoided. Short extension cables are also available. Please note that video source equipment and cable length will play a part in the quality of the video image on the display. Be aware of the limitations of your equipment and the effect of the additional cable on the picture quality of your display.

Q: How is the connector terminated?

The conductors of the cable are soldered securely to the DIN connector. This is standard practice for factory-assembled cables, and results in a high-performance, highly stable connection.

Q: Is this CL2 or CL3 rated?

The Runners use a CL2-rated jacket, which is suitable for installation into walls and ceilings of residential applications. An installer should always check with local building codes regarding cable jackets & installation practices.

Q: How large of a conduit can I put it in?

3/4” conduit, with a 90-degree sweep. Conduit can be field-bent, or come as a factory sweep.

Q: How long of a cable can I have?

Normal signal length recommendations apply. For standard definition analog A/V (composite, S-video, YPbPr) signals, lengths often exceed 200 feet. The longest runners that will be stocked are 150-footers. See the cable length “rules of thumb” in Appendix A

Q: Does it support Hi-Def?

Yes. The analog system supports VGA & YPbPr analog video, both of which support HD resolutions (up to and including 1080p). Length considerations should always be taken into account. The digital system supports all HD resolutions carried by HDMI, including 1080p.

Q: How thick does the wall need to be to hold the wall plate? Do I need a special J-Box?

The Break-Away wall plate takes up the same space as a standard electrical outlet/junction box. It fits into either plastic or metal single-gang box, or into a mud ring/Arlington bracket. A metal box is preferred.

Q: What kind of faceplate do the wall plates use?

Any standard decora style faceplate.

Q: I want a wall plate on one end, and a pigtail on the other end—will this work?

Yes that will work fine. The type of termination can vary—wall plate/wall plate, flying lead/flying lead, flying lead/wall plate.

Q: Can I run the RapidRun alongside AC power?

That is not a good idea no matter what kind of AV cabling is being installed. Best practices indicate that at least low-voltage communication cables should be separated from AC power lines by at least 6 inches of space. If they must intersect, do so at a right angle.

Q: How strong is the pulling eye?

Pulling force should not exceed 30 pounds. The pulling ring is designed to fail at this force, in order to protect the connector terminations. If stronger pulling force is needed, a pulling aid that attaches to the wire itself (such as a Kellum grip) should be used.

  • Currently there are no related products.

  • "Quick turnaround time, exactly the product I needed, and a good selection of delivery options. What more to you look for from an online delivery?"

    - Jim Mills

Credit Cards