2 Foot Category 6 Molded Ethernet Gigabit Network Patch Cable with Snagless Boots

Applications/Solutions:

• Connects workstation to wall outlet
• Patches from hub to distribution panel
• May be used with gigabyte networks
• Great For DSL and Cable Modems

• Category 6 Patch cables are constructed with top quality components
• The Strain relief prevents the cable from being bent at sharp angles at the connector to minimize the stress at the plug termination point
• Colored  Hoods for departmental color coding
• Category 6 patch cables are carefully constructed and tested, to keep the Near End Crosstalk (NEXT) well within acceptable limits
• Category 6 patch Cables are 2.5 times faster than Category 5 E or Enhanced.
• Category 6 Stranded Cable is built to withstand the repeated flexing, common in PC to wallplate applications, without damage to inner conductors. Because of higher attenuation it is recommended for short runs of 25 feet or less.
• The RJ45 High Performance Category 6 UTP Patch Cable is the perfect performance upgrade.
• Used to replace any Category  5 cable that fails to support 100 Base-T or Gigabit Ethernet.
• Perfect in conjunction with 100 Base-T and Gigabit Ethernet networks.
• 50 micron gold plated connectors to ensure a clean and clear transmission.
• Snagless molds protect the RJ45 tap from being damaged during installation.
• With RJ45 male-to-male connectors and a snagless molded strain relief.
• 2-row staggered pin configuration to control cross-talk at hyper-frequency.
• Internal load bar assures accurate positioning of pairs and consistent high performance.

  
  

  • Available Colors:
    

    	Black    White      Gray
    	Red      Yellow     Green      Blue
    	Pink      Purple     Orange